Saturday, December 7, 2013

Sig Sauer P226 Review


The Sig P226 has been around since the XM9 service pistol trials in the mid-80s.   Its' basic design comes from the P220 but it has a double stack magazine and is chambered in 9mm (40S&W and 357SIG variants are out now obviously).  

Here's my summary of the pros and the cons of the gun:

Pros:
-Ultra reliable.  I've had several P226s over the years and none has had reliability issues at all.
-Nitron finish.   Very durable metal surface hardening treatment that does a great job at preventing corrosion as well.
-Aftermarket accessories are readily available.
-Very accurate gun.
-You can choose which trigger system you'd like (DA/SA/SAO/DAK/ect…).  DA/SA is the most common and the one I prefer.
-Available in tons of different configurations to suit the users needs.
-No external safeties.
-Compliant in most ban states.
-Very attractive looking gun.
-Magazines are widely available from 15-20 round factory options.


Cons:
-Expensive.  While surplus P226s are still out there at reasonable costs, new models are priced higher than many other competitors out there.
-Relatively heavy.   Aluminum frame models come in at 34oz.
-High bore axis.  Not an issue in 9mm but with some more powerful rounds it may slow down follow up shots for less skilled shooters.


All in all, the P226 remains a classic gun that you can buy and be very certain you won't go wrong along with the CZ75, G17, 92FS, ect….   Here's my video with some shooting, a breakdown of the pistol, a discussion of the operation and features of the gun, and my overall thoughts on it:


Friday, November 29, 2013

Elzetta High Output Bravo Flashlight


Earlier this year Elzetta mentioned on the forums that they were going to come out with a high output light to compete with the slew of high end light makers that have come out with 500 lumen and up lights this year.   Well, it's a reality now with their 650 lumen Bravo model and 900 lumen Charley model.   Here's what I've found so far with my Bravo model…

Pros:
-The light just screams quality.  All the components are top notch as is the fit/finish.   All operations are smooth and have positive actuations when used.
-650 lumen output in the 2 cell, 900 lumens in the 3 cell model.  The AVS head automatically senses the power source and the output generated corresponds to the power (i.e. 650 or 900 lumens)
-Uses an acrylic lens vs reflectors for softer edges on the beam pattern (see video for a demonstration).  The lens is field replaceable without tools and apparently different lenses are in the works (like a larger flood version).
-Cree XM-L2 LED
-Elzetta designs their lights to be interchangeable.  So, you can pick the tailcap, to include tapeswitch models) you want.   There are several models to choose from though.   They also have 2 bezels (crenellated and standard) and two bodies to choose from.     If you have the old ZFL-M60s you can just purchase the high output head and get the same performance.  
-Fully potted electronics so shock/impact will not have any influence on output or reliability of the light.  These lights have a reputation as the toughest lights in the world and I believe it.
-Lights come lubricated/greased where they should be and have o-rings on the head/tail for use in wet environments.
-100% made in the USA.
-Springs are used on the head/tail for shock resistance so you won't have the light flickering under recoil should you mount it on a gun.
-The beam has a bright hotspot.  Spill is generous with good flooding as well for peripheral vision (again see video for example).


Cons:
-Really the only one I can think of is Elzetta states not to use 18650 batteries with it and some folks will be very put off by that.
-Price is roughly $190-235 depending on the options you chose.   But, as I stated above the quality is top notch.

Here's a video with some shooting, beam comparisons with other lights, a demonstration of the properties of the light, and my overall thoughts on it:




https://www.youtube.com/watch?v=HG3oCwKibQY



Wednesday, November 27, 2013

Tapco Intrafuse AK Mags


Lots of folks like to piss on TAPCO (even me from time to time) but I'm a fan of their G2 AK trigger and their mags have always functioned fine in my rifles but seemed to have one problem---they'd break.    Each time it was the locking lug but unfortunately I didn't do reviews back in those days and have no footage of it.   So, I decided to try to test these mags on film and here's what I found:

Pros:
-Reliable.  As stated above, I never had function issues with TAPCO AK mags.
-Cheap.  If you follow the deals these mags can sometimes be had for $6-9/ea
-They count as 3x 922r parts and are made in the USA
-TAPCO has always stood behind their no questions asked warranty in my experience.
-The texture of the mags provides a good gripping surface when removing from a pouch/pocket.


Cons:
-No metal lining or reinforcements.

Here's  a video with some shooting, multiple drop tests of both the '47 and '74 variants, an overview of the mags, a dirt test, and a short diatribe of what I think of them overall:

https://www.youtube.com/watch?v=qfMgrofafdc

Friday, November 22, 2013

Magpul MOE 1911 Grips

Many 1911 fans have been requesting that Magpul produce a set of grips for a while now.   Apparently after Magpul's trainers joined the chorus of folks requesting the grips they got busy and the MOE grip panels are the result.   Here's what I've found with them:

Pros:
-Ergonomic.  The relief cut does aid in activating the mag release without having to shift your grip
-They have a 'medium' texture.  Not so aggressive that it will fray clothing but they will provide a good gripping surface with wet, sweaty, or bloody hands
-They fit well with magwells but also look good with guns without a magwell
-Compatible with ambi-safeties
-Thin.  Only .25'' wide at max.  This could be a pro or con I suppose but it is an important note
-Cost.  The MSRP is only $20

Cons:
-Only available for full size frames currently

I do like these grips overall and they'll be staying on one of my 1911s.   Here's a video with some shooting (TRP and Range Officer used in the video), a close up and comparison of the grips and their features, followed by what I think of them overall:


Saturday, November 16, 2013

BCM Mod 3 Gunfighter Grip



The move toward more vertical AR grips probably isn't going anywhere due to the way many firearms schools/instructors are teaching a more squared up stance for firing while standing/kneeling.    The more vertical grips offer a different (some say less stressed and I would agree) wrist angle when firing from those positions.  Here's what I've found with the Mod 3 Gunfighter grip from BCM.

Pros:
-Good grip texturing on the sides of the grip combined with the lines on the front provide a good positive grip
-Price.  The Mod 3 retails for $18
-It has a rubber storage hinged cover for storing gear inside it
-Comes with a tab in front for covering up the area where a traditional AR trigger guards have a tendency to rub on your finger.   It also works with a wide variety of billet lowers and the Magpul trigger guard
-I like the beavertail for being able to get my hand up high on the grip
-It's 1/4'' wider in from side to side than Mod 1/2 grips so it fills your hand better which I prefer as I have relatively large hands

Cons:
-The tab on the trigger guard seemed like it was 'pushing' back against the grip when I was installing it. It probably wouldn't be an issue at all as others have said it wasn't with their set-ups.   But, I relieved it a little on my rifle to make it fit without pressure
-With all of these more vertical grips the rifle will point lower with the same grip angle of your shooting hand (shown in the video).   It's not really a 'con' per se but it's something I noticed when I first started shooting with the grip on the rifle


All in all for $18 it's certainly something folks should consider if they're looking for a new more vertical angled grip on their AR pattern rifles.

Here's a video demonstrating the different angles and how it stacks up compared to the Magpul MOE grip with is probably the most common replacement grip for the standard A2 grip out there:

http://www.youtube.com/watch?v=fJOsvZTgTOE

Tuesday, November 12, 2013

Serbian M70 O-PAP AK-47 Variant


The M70 O-PAP is flying off the shelves these days due to the known quality of Zastava rifles, the cost, and because Century seems to be importing them by the boatload.    Here's what I've found with mine:

Pros:
-100% reliable
-Fit and finish are excellent for the price point it comes to market at
-Cost.  It's around $600 most places and some have it even lower
-Cold hammer forged barrel
-Everything (safety, top cover, gas tube, ect...) is tight.
-Accepts all standard size com-bloc mags with no more wobble than is normally found on '47 variants
-Imported with correct double stack bolt
-Utilizes the bulged, RPK style, front trunnion
-Comes with 2 steel surplus mags
-I was able to get consistent 3-3.5'' groups with it with a variety of commie steel jacketed ammo
-The grip isn't the best but it's certainly better than the standard 'peg' grip; at least to me
-The prevalence of these Yugo/Serbian rifles in this country has led a lot of accessory companies to make parts for them as well as standard AKM variants.

Cons:
-It weighs just over 8 lbs unloaded
-Barrel is not chrome lined
-Many parts (stock, optics rail, handguards, ect....) are non-standard for AKM pattern accessories)
-Some folks report 'cheek slap' from the stock.  I discuss/demonstrate how to avoid that in the video below however

All in all it's an excellent rifle for the money.    Build quality is on par with the higher end AKs yet it's priced on the lower end of the spectrum.   Function is great and with a little cleaning up of the wood it would look pretty good to boot.  

Here's a video with a bunch of shooting (day/night), a discussion of some of the unique features of the rifle, an accuracy test, and an what I think of it overall:

http://www.youtube.com/watch?v=x-fDRqPeCwc ≈                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

Saturday, November 9, 2013

Gen 3 Glock 26

The Glock 26 is one of the most popular carry guns for good reason.   I've been carrying the Gen3 G26 for a long time and here's what I've found.

Pros: 
-Reliable.  The gun has had 0 malfunctions
-Accurate.  For s subcompact gun it's relatively easy to shoot well. 
-Durable   
-Easy to maintain 
-TONS of aftermarket support.
-Accepts 15, 17, and 33 round factory magazines 
-Glock's customer service is excellent
-Cheap replacement parts, should you ever need them 
-Low Bore Axis resulting in a soft shooting gun, especially for the weight.
-Easily modified to fit the shooters' preferences
-Requires very little cleaning/lubrication to run reliably 
-Carries well but you still have a 10+1 capacity.



Cons: 
-Most shooters will not be able to get amore than 3 fingers on the grip.
-Comes with a serrated trigger (even the US models)

Here's a video with some shooting, a size comparison with the CM9 & S&W Shield, and a discussion of the pros and cons of the gun.