Friday, November 8, 2013
ROSCH Works SL1
The SL1 by ROSCH Works is a combination front sight and weapon light in one lightweight, very well thought out, rugged, compact, and ergonomic package. I've had it for a little over a month now and ran it on two rifles both during the day and night. Here's what I've found so far….
Pros:
-Well thought out. Mounting, operation, and zeroing are simple and straightforward.
-It's probably over engineered. 7076 T6 aluminum body. Finished with type III anodizing and cerakote on the body/tailcap. Type III anodizing only on the bezel. Steel components (sight post/bolts) are melonited for corrosion resistance and surface hardening.
-Malkoff driver. CREE XP-G2 6200k temp output. It's a good balance of throw and spill. The spill is especially impressive (see video below).
-Mounts to any 1913 style rail.
-O ring sealed on the front and back end for water resistance
-3.2oz (with single CR123 battery), 3.4'' length
-Comes with hex wrench and sight adjustment tool along with loctite. Loctite isn't needed due to the design but out of blind obedience to my old platoon sergeant I loctite everything anyway….
-250 lumen output with a 50 minute run time (at that output; it will run with a diminished output much longer).
-Mounts up at the 12 o'clock position.
-Usable from cover/barricades
-Low likelihood of snagging on slings/gear
-Shadowing at the 6 o'clock position
-Easy activation with either hand
-Cost. $235 shipped which in my opinion is very reasonable for the quality of the components you get and what it would cost for similar components (front sight, light, possibly a mount) of similar quality.
-Constant on, momentary on, and lock out are the modes. Very simple which under stress is generally your friend.
Cons:
-The tailcap design may lead to flickering under recoil of heavy calibers. I didn't experience it on my 5.56 ARs nor did I get it when hitting the buttstock on the ground but ROSCH Works says it can happen so I'll take their word for it.
-The standard tailcap is not compatible with aftermarket tailcaps.
-ROSCH Works is developing a tailcap adaptor which will be compatible with Surefire E-series tailcaps. This will fix the issue above (if it's perceived as an issue). It will also allow for pressure switches to be ran.
All in all, it really is a great product and it seem like ROSCH Works has a winner on their hands with their first product released to the marketplace. In the video below I do a little shooting (day/night), discuss & demonstrate the features of the light, and go over what I think of it overall:
http://www.youtube.com/watch?v=831Orr78sts
Sunday, October 27, 2013
Condor Exo Plate Carrier (XPC) Review
The rise in body armor among the civilian population has been trending upward the last several years due to a variety of factors--economic fears, lower cost of armor (especially soft panels and steel plates), and a better understanding of the capabilities of these systems have all helped in the proliferation of civilian owned/used body armor.
Most plate carriers or body armor systems on the market are marketed toward the military/LE community however; the features and prices reflect it as well. One offering out now on the lower end of the cost spectrum is the Condor XPC. It comes to market around $60-90 and claims to offer some of the features of the top notch offerings out there so I snatched one up to see if it's true.
Pros:
-Cost. It's probably going to be the driving factor for most folks looking at this rig.
-It can be used with just soft armor, plates, or a combination of the two.
-Available in black, tan, OD green, and multicam.
-Hook and loop sections on the front and back for nametapes, patches, ect... These sections can still be used with MOLLE compatible accessories.
-Fully adjustable cumberbun.
-Did much better in my drag test that I expected honestly.
-Adjustable shoulder straps.
-Shoulder strap padding is better than some of Condor's previous offerings that I've seen.
-Comes in S/M (takes 10x12.5'' plates) and L/XL (takes 10.5x14.5'' plates)
Cons:
-I'm not a fan of the mesh interior lining. They say it's for cooling but I'd prefer some normal cordura for increased durability.
-The hydration tube loops seem like they don't integrate well into the design. I'd like to see them redesigned.
-There is a map pouch in the front. It doesn't fold down like many other carriers though. That's probably just a personal preference thing however.
-I have a bunch of plate carriers; the stitching on this isn't as heavy as some of my high end carriers--no doubt about it. But, for most non-military folks it'll likely hold up just fine. Time will tell I suppose.
Here's a review/overview video with some shooting, a drag test, a discussion of the features of the carrier, and just my thoughts on it overall:
Saturday, October 19, 2013
Ameriglo I.C.E. EMS Claw Rear Sight For Glocks
The CLAW rear sight was designed to aid in one handed manipulations and it does just that. I've had it on my Glock 19 for a while and here's what I've found.
Pros:
-It really grabs onto hard surfaces to aid in one handed racking of the slide
-Standard heights for Glock (large and small frame), and M&P pistols
-Black nitrided finish for durability and hardness
-Cost. It's only $24 for the rear sight. Tough to beat that.
Cons:
-I'd like to see serrations on the rear of the sight but that would likely add cost. It's a trade off I suppose.
Here's a video with some shooting, close up shots of the sight on the gun, and my overall thoughts one the sight:
Thursday, September 26, 2013
Magpul MBUS Pro Back Up Sights Review
Lots of gun owners aren't a fan of polymer; bottom line. The merits of that mindset can be debated for days without reaching a conclusion but the fact remains. Magpul has released a set of all steel back up iron sights to satisfy the desires of those steel-loving devotees. Here's what I've found so far with them....
Pros:
-Priced lower than comparable competitors steel back up sights. MSRP is $105 for the rear, $85 for the front.
-They have a melonited surface finish treatment that hardens them for durability and also provides corrosion resistance.
-All adjustments can be made without tools but the likelihood of them being accidently moved is low in my opinion (see the video for a demonstration of why)
-Very slim and sleek design but they're still standard AR height.
-Front sight is a great option for those with a railed gas block.
-Can be mounted on any 1913/STANAG rail.
-Rear sight is 1.8oz, front sight is 1.5 oz.
-Dual apertures on the rear.
-Serrations around the rear aperture and on the sides of the front sight reduce the likelihood of glare impacting your sight picture when shooting in bright sunlight.
-Magpul is a company that stands behind their products and you can be sure great CS will be there if you ever need it.
Cons:
-Cost. $190 is a tough pill to swallow when many of us have never had the slightest issue with our MBUS Gen2s.
-They're MIM. I don't mind this but I know lots of folks do so it's worth mentioning.
All in all I think they'll sell well and they'll cause their competitors to re-consider their pricing strategies if they want to stay relevant in the marketplace. In the video below you'll see them in action, close ups of all the features, and a discussion of the pros in cons.
Saturday, September 21, 2013
Silver Bear 7.62x39 Soft Point Ballistic Gel Test
Finished up the testing of the Silver Bear 7.62x39 125gr soft point round. Lots of folks say Russian soft point rounds don't expand; well I figured I'd test them to see if that's the case. Here are the conditions and results.
Test conditions:
-16'' SGL21
Test conditions:
-16'' SGL21
-Test rounds fired from 15 feet
-"FBI spec" (Their term, not mine...) Clear Ballistics gel block
-"FBI spec" (Their term, not mine...) Clear Ballistics gel block
Chrono Data:
-2403 feet per second
-1601 foot pounds of energy
Results:
-Expansion started at 1'' mark
-Pretty nasty wound track
-Steel jacket separated from the core
-20.5'' penetration
Here's the video showing the test, the permanent cavity, both shots into the gel, and a discussion of the results:
Wednesday, September 11, 2013
FNH FNS 9mm Review
I've had the FNS since last November of last year and have been putting a good bit of rounds through it to date and here's what I've found.
Pros:
-100% reliable thus far
-Comes with 3x 17 round magazines
-I like the night sights with the wide "u" notch rear
-It's more accurate than I am
-Reasonably priced vs. its' competitors
-Low bore axis
-Cold hammer forged barrel
-Standard 1913 rail
-Ambi mag release and slide lock
-Great ergos
-Forward and rear cocking serrations
-Ease of maintenance
-Comes with interchangeable flat and arched backstraps
-Extractor doubles as a loaded chamber indicator like a Glock
Cons:
-I think the trigger's a little heavy (breaks between 6-7 pounds)
-FN seems to have fixed the initial trigger locking issues
-The standard model has an external safety. The LE restricted model doesn't. I'd like to see them offer both to everyone as many folks do not want an external safety.
-Aftermarket magazine availability is an issue compared to its' competitors
Here's a video with a little shooting, a demonstration of how to break the gun down, a size comparison with a G17/1911 for those unfamiliar with it, and a discussion of the features of the gun:
Pros:
-100% reliable thus far
-Comes with 3x 17 round magazines
-I like the night sights with the wide "u" notch rear
-It's more accurate than I am
-Reasonably priced vs. its' competitors
-Low bore axis
-Cold hammer forged barrel
-Standard 1913 rail
-Ambi mag release and slide lock
-Great ergos
-Forward and rear cocking serrations
-Ease of maintenance
-Comes with interchangeable flat and arched backstraps
-Extractor doubles as a loaded chamber indicator like a Glock
Cons:
-I think the trigger's a little heavy (breaks between 6-7 pounds)
-FN seems to have fixed the initial trigger locking issues
-The standard model has an external safety. The LE restricted model doesn't. I'd like to see them offer both to everyone as many folks do not want an external safety.
-Aftermarket magazine availability is an issue compared to its' competitors
Here's a video with a little shooting, a demonstration of how to break the gun down, a size comparison with a G17/1911 for those unfamiliar with it, and a discussion of the features of the gun:
Saturday, September 7, 2013
Midwest Armor Guardian IV Armor Test And Review
I recently tested the Guardian IV ceramic level IV plates from Midwest Armor. They were designed to be a reasonably priced plate while still maintaining level IV protection. They retail for $199 but Midwest Armor was gracious enough to offer my viewers with a discount code of "MGG" available on their website. With that code you'll get each plate for $125 (pretty good price for level IV protection). I shot them up with 9mm, 40 S&W, 5.56x45, 7.62x39, 5.45x39, and 7.62x54r. Here's what I found:
Pros:
-Stopped all rounds
-Made in the USA
-Guaranteed for 5 years
-10''x12'' and 1'' thick
-Curved for comfort
-The shoulder areas are cut for shouldering long guns
-Each plate weighs 7.3 pounds
Cons:
-Really the only one I can think of is the fact that it only comes in one size.
Pros:
-Stopped all rounds
-Made in the USA
-Guaranteed for 5 years
-10''x12'' and 1'' thick
-Curved for comfort
-The shoulder areas are cut for shouldering long guns
-Each plate weighs 7.3 pounds
Cons:
-Really the only one I can think of is the fact that it only comes in one size.
Subscribe to:
Posts (Atom)